Tuesday, February 23, 2010

External Bluetooth Gps On Laptop

howler cube of cardboard

The monitor that I use for C64 and Amiga 4000D has no speakers. But why buy them when I have everything needed?
It must be collected only right.


amplifier comes as the RU-120 from the journal amplifier used. The monitor is actually a Apple Studio Display 15-inch, VGA, S-Video, composite video, audio input and output as well as ADB port.

Built with:
  • 2 speakers, which previously times the phones were in Lauthöhren.

  • A few cables

  • 2 small boxes

  • little cardboard

  • wood glue

  • scissors, knives, cutting board, soldering irons and other things that you need to tool.

The simple design of a closed box sounded much better in a lot, as the loose speaker.
The trial version of FuzzMeasure (MacOS) I could measure the signal output and gradually improve the performance.

(green is without a bass reflex tube, red with) In addition

is therefore somewhat absorbing Foam (also originally made for packing) and a self-wound bass reflex tube of cardboard to come.
The resonant frequency of the pipe I've set to slightly below 70 Hz. With the 3.9 liter and a diameter of 3.7 cm to get placed on a length of 15cm.
would have been dear to me, a frequency of 100Hz, but the speakers are ultimately used broadband types. If I had the pipe cut to the important area of 5cm from 1kHz would be virtually disappeared.
is the bass a little raised and the high range drops only slightly.
I also think the bass reflex port to see the boxes, a little fancier.

Nonetheless, I naturally failed to make gold out of shit. :-)
There were and are still tiny speakers that are optimized only for voice, but I'm quite happy with my work.

Friday, February 19, 2010

The Best Psychiatristhyderabad

Shrew

Or: The Taming of wiederspenstigen hard drive.

As I recently disposed of at the recycling center my electrical,
dropped my gaze on a small circuit board that was there.
Have they taken away, although I actually wanted to scrap loss.

How is my conjecture confirmed, this is the board for a
DOM (Disk on Module) or less a miniature hard drive, from a time when there were no
SSD ( Solid-state drive) announced.

So without further ado, my curiosity was what could be stored on
satisfying, however. A DOM is in fact meant to be
directly plugged into the IDE / ATA connector on the motherboard.
The part has a socket instead of a plug and which is also well
still mirrored. My solution to

:
2 x 22 pole, double-row headers, Remove
like a pin on each page, for locked coding
43 x short copper wires with insulation paint,
The mandatory
hot glue and too much time. :-)

The connections are therefore of a series to another, crossing
soldered and together with the hot glue a pretty
adapter.

Works! And the design is also quite stable. Unfortunately
were no data on the interresting 32Mb sized module.
That was the punishment for curiosity. For that I am
in dealing with enamelled copper wires much better
become. - That's also what.

Monday, February 15, 2010

Hot Indain Women Sari Showing Boobs

Well, if that is still what?

Actually the title should say it all already.
principle is the problem that: I play too much. No, seriously!
addition to the Church of Frag , my Quake Live Clan, I'm still stuck on Guild Wars. I also noticed
but also a striking increase in single-player titles and is still young the family arrived in the form of a PSP.
The fact that I have since Halo 2 for the first time back at the games bought RELEASETAG (Mass Effect 2 and Bioshock 2), just after the border, the "work" to resume, p